JQ.H0Cr21Ni10 Igesi yensimbi engenasici evikelwe ngocingo oluqinile lokushisela emgqonyeni

JQ.H0Cr21Ni10 Stainless steel gas shielded solid welding wire in barrel Featured Image

1. Igesi evikelayo: Naka ukuhlanzeka kwegesi evikelayo, kanye nesilinganiso esinconyiwe sengxube yegesi ngu-Ar+1-3%O2.

2. Ukugeleza kwegesi: 20-25L/min.

3. Ubude bomile: 15-25mm.

4. Susa ngempela ungqimba lokugqwala, umswakama, amafutha, uthuli, njll engxenyeni ye-welding.

5. Ngesikhathi sokushisela ngaphandle, lapho isivinini somoya singaphezu kuka-1.5m/s, kufanele kuthathwe izinyathelo zokuvikela umoya, futhi izinyathelo ezifanele zokuvikela umoya kufanele zithathwe ukuze kuvinjelwe ukwenzeka kwama-blowholes.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Isicelo

Isetshenziswa kakhulu ku-petrochemical, umkhumbi wengcindezi, imishini yokudla, izinto zezokwelapha, okokusebenza kukamanyolo, imishini yendwangu, i-nuclear reactor, njll., njengokushisela kwe-12Cr18Ni9 (SUS 302), 06Cr19Ni10 (SUS 304) nezinye izinto.

Ukwakheka kwamakhemikhali entambo yokushisela(Wt%)

Imodeli	Ukwakheka kwamakhemikhali ocingo lokushisela (Wt%)
	C	Mn	Si	Cr	Ni	Mo	P	S	Cu
JQ.H0Cr21Ni10	0.035	1.80	0.31	20.15	9.52	0.03	0.013	0.008	0.34

Ukusebenza komkhiqizo

Imodeli evamile ethobelanayo (elinganayo).		Isibonelo sezakhiwo ezibonakalayo zensimbi efakwe (nge-SJ601)
GB	AWS	I-Tensile StrengthMPa	Elongation%
I-S308	ER308	594	40.5

Ireferensi yereferensi yokushisela umkhiqizo (AC noma DC+)

Ububanzi bentambo(mm)		￠0.8	￠1.0	￠1.2
Welding current(A)	I-flat welding, i-welding enezingqimba	70-150	100-200	140-220
	welding mpo	50-120	80-150	120-180
	Ukushisela ngaphezulu	50-120	80-150	160-200

Imininingwane Yomkhiqizo

Ububanzi bentambo	￠0.8	￠1.0	￠1.2
Isisindo sephakheji	12.5Kg/ingcezu	15Kg/ingcezu	15Kg/ingcezu

Izinyathelo zokuphepha zokusetshenziswa komkhiqizo

1. Igesi evikelayo: Naka ukuhlanzeka kwegesi evikelayo, kanye nesilinganiso esinconyiwe sengxube yegesi ngu-Ar+1-3%O2.

2. Ukugeleza kwegesi: 20-25L/min.

3. Ubude bomile: 15-25mm.

4. Susa ngempela ungqimba lokugqwala, umswakama, amafutha, uthuli, njll engxenyeni ye-welding.

Iziphakamiso ezingenhla ngezereferensi kuphela, futhi isimo sangempela siyoba khona emsebenzini othize.Uma kunesidingo, ukufaneleka kwenqubo kufanele kwenziwe ngaphambi kokunquma uhlelo lwe-welding.

Okwedlule: I-JQ.ER307 Igesi yensimbi engenasici ivikele intambo yokushisela eqinile emgqonyeni

Olandelayo: I-JQ.MH1Cr24Ni13 insimbi yokushisela yensimbi engagqwali ngaphansi kwamanzi

Bhala umlayezo wakho lapha futhi usithumelele wona